Mold Max 60 High Temperature Resistant (294°C) High Performance Molding Silicone

Mold Max 60 High Temperature Resistant (294°C) High Performance Molding Silicone

Mold Max® 60,  is a tin grade Shore 60A silicone formulated for applications requiring high heat resistance (up to 560°F / 294°C). This silicone has low viscosity and cured silicone has very low shrinkage. A and B parts according to their weight 100A & It is mixed in 3D ratio.

The life of the mixture is 40 minutes and the curing time is 24 hours. Tin and tin-lead alloy are used in casting of low melting metals.


General Features

  • High temperature resistant, developed for high temperature applications and withstands up to 560°F / 294°C
  • It has a low mixing viscosity and the shrinkage of cured silicone is negligible.

IMPORTANT: Gently apply the release agent to all surfaces of the model with a soft brush to apply it thoroughly over the entire area. Then apply fine spray paint and let dry for 30 minutes.


Technical Specifications

  • Specific Gravity 1.45 g/cc
  • Specific Volume 1.19 m3/kg (19.1 cu. in./lb.)
  • Mixture Life 40 minutes
  • Curing Time 24 hours
  • Shore A Hardness 60
  • Tensile Strength: 27.44 Bar (398 psi)
  • 100% Module 22.82 Bar (331 psi)
  • Retention at Break 132 %
  • Die B Breaking Force 63 ply
  • Drain Allowance <0.0015 in. / in.
  • Mixing Ratio by Volume 1A:1B
  • Mixing ratios by weight 100A:3B
  • Color: Red
  • Usable Temperature (min): -53 °C (-65°F)
  • Available Temperature (max.)  293 °C (560 °F)
  • Mixture Viscosity 20,000 cps
  • Dielectric Strength >500 volts/mile
  • Dielectric Constant, 100Hz 3.4
  • Power Dissipation Coefficient, 100Hz 0.02
  • Volume Resistivity 9 x 1014 ohm/cm
  • Thermal Conductivity 0.347 W/M*K
Our customer support team is here to answer your questions. You can ask us anything. You will be contacted instantly via WhatsApp.
Hello, how can I help you?